WORLD Cutters Cbn-Pcbn Inserts Results
WORLD Cutters Cbn-Pcbn Inserts Results
Cutting Tool Comparison: This refers to the specific WORLD Cutters model or type being examined or compared.
Cutting Speed Vc(m/min): Represents the speed at which the cutting tool can operate.
Efficiency (s/pcs): Efficiency is measured in seconds and indicates the time it takes to complete a cutting operation on a workpiece.
Life (pcs/cutting edge): Refers to the lifespan of the cutting tool's edge, measured by the number of pieces it can process before needing to be replaced.
Solid CNGO 120716 N-1520
| Cutting parameters: | Vc:800m/min ap:1,5 mm fn:0,6 mm/r |
| Efficiency (s/pcs) | 22 (s/pcs) |
| Life(pcs/cutting edge) | 350-400 pcs |
| Other Brand (pcs/cutting edge) Ceramic Insert | 30-35 pcs |
| Industry: | Auto parts |
| Workpiece name: | Flywheel |
| Workpiece material: | HT250 |
| Workpiece hardness: | HB190 |
| Machining position: | Plane |
| Machining type: | Rough |
| Insert grade: | N-1520 |
| Insert specification: | CNGO 120716 |
| Cutting type: | Dry Cutting |
Solid RCMX 090700Y N-1526
| Cutting parameters: | Vc:247m/min ap:0,5mm fn:0,2mm/r |
| Efficiency (s/pcs) | 18 (s/pcs) |
| Life(pcs/cutting edge) | 100 pcs |
| Industry: | Auto parts |
| Workpiece name: | Flywheel |
| Workpiece material: | HT250 |
| Workpiece hardness: | HB190 |
| Machining position: | Plane and inner diameter |
| Machining type: | Finishing |
| Insert grade: | N-1526 |
| Insert specification: | RCMX 090700Y |
| Cutting type: | Dry Cutting |
Solid CNGA 120412 N-1520
| Cutting parameters: | Vc:800m/min ap:1,5 mm fn:0,35 mm/r |
| Efficiency (s/pcs) | 22 (s/pcs) |
| Life(pcs/cutting edge) | 350-385 pcs |
| Other Brand (pcs/cutting edge) Carbide Insert | 35-40 pcs (Vc:300m/min ap:1 mm fn:0,3 mm/r) |
| Industry: | Auto parts |
| Workpiece name: | Flywheel |
| Workpiece material: | HT250 |
| Workpiece hardness: | HB190 |
| Machining position: | Inner end face |
| Machining type: | Finishing |
| Insert grade: | N-1520 |
| Insert specification: | CNGA 120412 |
| Cutting type: | Wet Cutting |
Solid CNGN 120712 N-1526
| Cutting parameters: | Vc:800m/min ap:2-3mm fn:0,45mm/r |
| Efficiency (s/pcs) | 5 (s/pcs) |
| Life(pcs/cutting edge) | 1000 pcs |
| Industry: | Auto parts |
| Workpiece name: | Brake disc |
| Workpiece material: | HT250 |
| Workpiece hardness: | HB190-210 |
| Machining position: | Brake Surface |
| Machining type: | Continuous, Rough machining |
| Insert grade: | N-1526 |
| Insert specification: | CNGN 120712 |
| Cutting type: | Dry Cutting |
SCGN 090408-AC N-1526
| Cutting parameters: | Vc:600m/min ap:0,25mm fn:0,3mm/r |
| Efficiency (s/pcs) | 20 (s/pcs) |
| Life(pcs/cutting edge) | 120 pcs |
| Industry: | Auto parts |
| Workpiece name: | Brake disc |
| Workpiece material: | HT250 |
| Workpiece hardness: | HB190-210 |
| Machining position: | Brake Surface |
| Machining type: | Continuous, Finishing |
| Insert grade: | N-1526 |
| Insert specification: | SCGN 090408-AC |
| Cutting type: | Dry Cutting |
Solid CNGN 120716 N-1526
| Cutting parameters: | Vc:1130m/min ap:2-3 mm fn:0,5 mm/r |
| Efficiency (s/pcs) | 2 (s/pcs) |
| Life(pcs/cutting edge) | 60 pcs |
| Industry: | Auto parts |
| Workpiece name: | Brake drum |
| Workpiece material: | HT250 |
| Workpiece hardness: | HB190-210 |
| Machining position: | Outer circle, inner diameter |
| Machining type: | Continuous, Roughing |
| Insert grade: | N-1526 |
| Insert specification: | CNGN 120716 |
| Cutting type: | Wet Cutting |
Solid DNGA 150408 N-1502 X7
| Cutting parameters: | Vc:427m/min ap:0,2mm fn:0,1mm/r |
| Efficiency (s/pcs) | 13 (s/pcs) |
| Life(pcs/cutting edge) | 300 pcs |
| Industry: | Auto parts |
| Workpiece name: | Belt pulley |
| Workpiece material: | Gray cast iron |
| Workpiece hardness: | HB220 |
| Machining position: | Outer, circle, end face |
| Machining type: | Continuous, Finishing |
| Insert grade: | N-1502 X7 |
| Insert specification: | DNGA 150408 |
| Cutting type: | Wet Cutting |
CCGW 09T304 K-1500
| Cutting parameters: | Vc:300m/min ap:0,6mm fn:0,25mm/r |
| Efficiency (s/pcs) | 70 (s/pcs) |
| Life(pcs/cutting edge) | 700 pcs |
| Industry: | Auto parts |
| Workpiece name: | Cylinder liner |
| Workpiece material: | Alloy cast iron |
| Workpiece hardness: | HB230-260 |
| Machining position: | Inner hole |
| Machining type: | Continuous, Finishing |
| Insert grade: | K-1500 |
| Insert specification: | CCGW 09T304 |
| Cutting type: | Wet Cutting |
VCGW 160404 K-1502 X7
| Cutting parameters: | Vc:120m/min ap:0,2mm fn:0,1mm/r |
| Efficiency (s/pcs) | 50 (s/pcs) |
| Life(pcs/cutting edge) | 90 pcs |
| Industry: | Auto parts |
| Workpiece name: | Turbocharger |
| Workpiece material: | Alloy cast iron |
| Workpiece hardness: | HRC55-60 |
| Machining position: | Inner hole |
| Machining type: | Finishing |
| Insert grade: | K-1502 X7 |
| Insert specification: | VCGW 160404 |
| Cutting type: | Dry Cutting |
