1. It has both good wear resistance and impact resistance.
2. Suitable for general machining of gray cast iron and hardened steel
Rough & Finishing
Gray cast iron
Hardened steel High hardness alloy
Air-Ronditioning Compressor
400-800
(N) Premium Grades
N-1400
1. It has both good wear resistance and impact resistance.
2. Suitable for general machining of gray cast iron and hardened steel
Rough & Finishing
Hardened steel
Bearing,Gear
80-150
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(N) Premium Grades
N-1440
1. High hardness, excellent wear resistance, suitable for continuous high-speed machining of gray cast iron, and high hardness materials such as tungsten carbide.
2. Especially suitable for finishing.
Finishing
Grey cast iron, Cemented Carbide
Brake discs, Brake drums, Flywheel, Tungsten Carbide Roll Ring Air-Ronditioning Kompressor Bearing, Gear
400-1000
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(N) Premium Grades
N-1520
High hardness, excellent impact resistance, suitable for rough and finishing machining of gray cast iron and high-hardness alloy cast iron
Rough & Finishing
High hardness alloy, Cast iron, Cast High-speed Steel, High Manganese Steel
Roller, Slurry pump, Rolling mortar wall
30-100
(N) Premium Grades
N-1520
High hardness, excellent impact resistance, suitable for rough and finishing machining of gray cast iron and high-hardness alloy cast iron
Rough & Finishing
Gray cast iron
Brake discs, Brake drums
400-1000
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(N) Premium Grades
N-1526
1. Excellent wear resistance and stability, good universality
2. Suitable for rough and fine machining of gray cast iron materials
3. Finishing of high-hardness alloy cast iron
1. Excellent wear resistance and stability, good universality
2. Suitable for rough and fine machining of gray cast iron materials
3. Finishing of high-hardness alloy cast iron
Finishing
High-hardness alloy cast iron
Roll
30-100
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(N) Premium Grades
N-1900
Excellent heat resistance and impact resistance, suitable for continuous and interrupted processing of hardened steel
Continuous & Interrupted
Hardened steel, Laser cladding
Slewing Ring, Bearing Gear, Laser cladding
80-150
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(N) Economic Grades
N-5000
High hardness, excellent wear resistance, suitable for continuous high-speed processing of gray cast iron and processing of high-hard cast iron, good economics
Rough & Finishing & Continuous
Gray cast iron, High-hardness alloy cast iron
Brake discs, Brake drums, Flywheel, Roll
400-1000
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(N) Premium Grades
N-7000
High hardness, excellent impact resistance, suitable for rough and finishing machining of gray cast iron and high-hardness alloy cast iron
Rough & Finishing
High hardness alloy, Cast iron, Cast High-speed Steel, High Manganese Steel
Roller, Slurry pump, Rolling mortar wall
30-100
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(S)
Premium Grade
S-1400
1. It has both good wear resistance and impact resistance,
2. Suitable for general machining of gray cast iron and hardened steel
Rough & Finishing
Gray cast iron
Air-conditioning compressor
400-800
(S)
Premium Grade
S-1400
1. It has both good wear resistance and impact resistance,
2. Suitable for general machining of gray cast iron and hardened steel
Rough & Finishing
Hardened steel
Bearing,Gear
80-150
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(S)
Premium Grade
S-1440
1. High hardness, excellent wear resistance, suitable for continuous high-speed machining of gray cast iron, and high hardness materials such as tungsten carbide.
2. Especially suitable for finishing.
Finishing
Grey cast iron Cemented carbide
Brake discs, brake drums, Flywheel, Tungsten carbide roll ring
400-1000
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(S)
Premium Grade
S-1520
High hardness and excellent impact resistance, Suitable for rough and finishig machining of gray cast iron and high-hardness alloy cast iron
Rough & Finishing
High hardness alloy cast iron,
Cast high-speed steel,
High manganese steel
Roller, slurry pump, rolling mortar wall
30-100
(S)
Premium Grade
S-1520
High hardness and excellent impact resistance, Suitable for rough and finishig machining of gray cast iron and high-hardness alloy cast iron
Rough & Finishing
Gray cast iron
Brake discs,
brake drums
400-1000
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(S)
Premium Grade
S-1526
1. Excellent wear resistance and stability, good universality,
2. Suitable for rough and fine machining of gray cast iron materials,
3. Finishing of high-hardness alloy cast iron
1. Excellent wear resistance and stability, good universality,
2. Suitable for rough and fine machining of gray cast iron materials,
3. Finishing of high-hardness alloy cast iron
Finishing
High hardness alloy cast iron
Roll
30-100
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(S)
Premium Grade
S-1900
Excellent heat resistance and impact resistance, suitable for continuous and interrupted processing of hardened steel
Continuous & Interrupted
Hardened steel, Laser cladding
Slewing ring, bearing gear Laser cladding
80-150
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(S) Economic Grade
S-5020
It has high hardness and good wear resistance. It is suitable for continuous high-speed processing of gray cast iron.
It is recommended that the cutting depth should not exceed 2mm.
Excellent heat resistance and good impact resistance, suitable for continuous and lightly interrupted processing of hardened steel.
It is recommended that the cutting depth should not exceed 1mm.
The composite sheet has a full CBN structure, no carbide base, and has better impact resistance and thermal conductivity.
Continuous, lightly interrupted processing
Hardened steel
Bearing,Gear
100-180
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(K) Premium Grades
K-1905S
The composite sheet has a full CBN structure, no carbide base, and has better impact resistance and
thermal conductivity.
Moderately Intermittent
Hardened steel
Bearing,Gear
100-170
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(K) Premium Grades
K-1906S
The composite sheet has a full CBN structure, no carbide base, and has better impact resistance and thermal conductivity.
Medium and heavy intermittent processing
Hardened steel
Bearing,Gears, Valve seats, Universal joints
80-150
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(K) Premium Grades
K-1501-X7
-Mainly used for gray cast iron workpieces processing
-From continuous to heavey interrupted high speed finishing
-Strong coating adhesion, effectively improving tool life
High
efficiency processing
Gray cast iron
Brake disc
600-1200
(K) Premium Grades
K-1501-X7
-Mainly used for gray cast iron workpieces processing
-From continuous to heavey interrupted high speed finishing
-Strong coating adhesion, effectively improving tool life
High
efficiency processing
Case hardened alloy
Brake disc
100-300
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(K) Premium Grades
K-1502-X7
-Capable of the machining of various materials
-From interrupted to continuous high speed finishing
-Strong coating adhesion, effectively improving tool life
High
efficiency processing
Gray cast iron
Brake Disc, Gear
600-1200
(K) Premium Grades
K-1502-X7
-Mainly used for gray cast iron workpieces processing
-From continuous to heavey interrupted high speed finishing
-Strong coating adhesion, effectively improving tool life
High
efficiency processing
Powder metallurgy
Brake Disc, Gear
90-200
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(K) Premium Grades
K-1904-X6
Excellent thermal stability and red hardness for outstanding wear resistance.
Ideal for high-speed continuous finishing operations.
The coating's excellent temperature resistance and wear resistance can significantly reduce the wear of the cutting edges.
Gears, Bearings
Hardened steel
Bearing,Gear
180-300
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(K) Premium Grades
K-1905-X6
Achieves a harmonious balance between wear resistance and chipping resilience.
Tailored for medium to continuous finishing operations where consistency is key.
Boasts outstanding high-temperature and wear resistance, greatly minimizing edge wear.
High Precision Finishing
Hardened steel, Bearing Steel, Cemented Steel
Gears, Bearings
100-175
TYPE
 GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
(K) Premium Grades
K-1906-X6
Designed to withstand strong chipping, ensuring durability in the most demanding conditions.
Specialized edge treatment offers resilience in heavy interrupted finishing tasks.
The superior temperature and wear resistance of the coating extends edge life significantly.
Finishing
Cemented Steel
Gears, Bearings
100-200
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
V-Grades
V-1200
The coating improves the ability of insert to suppress the crater wear
Excellent heat resistance and good impact resistance, suitable for continuous and lightly interrupted processing of hardned steel. It is remonnended that the cutting depth should not exceed 1mm.
High-speed continuous finishing processing
Hardened steel
Bearing,Gear
100-180
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
V-Grades
V-5000
It has high hardness and good wear resistance. It is suitable for continuous high-speed processing of gray cast iron.
It is recommended that the cutting depth should not exceed 2mm.
General PCD grade with impact resistance and wear resistance
Low and medium silicon aluminium alloys, metal-based composite materials, wood-based composite materials, graphite
10µm
Ideal for sectors such as automotive spare parts, graphite molds, and woodworking. Also preferred for specific applications like processing plastic glass fiber.
TYPE
GRADE
FEATURES
APPLICATION
Suitable for processed materials
Suitable industry
Recommended Vc(m/min)
PCD
P220
The use of mixed particle sizes gives the blank extremely high wear resistance, termal stability and good impact resistance
Ensures superior cutting quality in fields such as automotive spare parts, graphite molds, and woodworking. Also offers high efficiency in processing metal matrix composites.